+ Level
+ Flow
+ Analytical
+ Process
+ Pressure
+ Temperature
Physical Address:
28 Hobill Ave
Manukau City

Postal Address:
PO Box 97036
Manukau City 2241
New Zealand

P:+64 9 579 2633
» Email us


IP80 Series

The IP80 series are impeller type (or “paddlewheel”) insertion meters designed for use with a wide variety of liquids in pipe sizes 1/2” to 8”. Sensors are available in brass, 316 stainless steel, PVC, and polypropylene. Bodies are machined from a solid rod for maximum precision. High-quality jewel bearings and nickel-bound tungsten carbide shafts are used for extreme low friction and long life. The rotation of the rotor is detected by a non-drag Hall-effect sensor. Output is a current-sinking pulse (square wave), which can be sent long distances (up to 2,000 feet) without a transmitter. This signal can be connected directly to PLC’s, counters, and computer cards, as well as a variety of AquaMetrix controls and displays. For rate and total display, the Shark-120/240 controller or Shark TX/P transmitter (loop powered) models are compatible with IP80 series sensors. They can be mounted in either surface, pipe or panel configurations. The IP80 series require special fittings that ensure correct depth placement in the pipe. Fittings come in a variety of materials for compatibility with specific applications. Tee fittings are individually wet calibrated at the factory and marked with the K-factor (pulses per gallon). Saddle fittings must be field-installed on the pipe and do not come wet-calibrated. K-factors for saddles are based on factory testing.

Download Data Sheet Download Data Sheet
Request More Information Request More Information
IP80 Series